Connect to deCONZ Phoscon

Connect to deCONZ Phoscon

Connect the Pulse Wall controller to deCONZ Phoscon

  1. In the Phoscon Webapp press Menu.
  2. Press Switches.
  3. Press Add new Switch.
  4. Press Other.
  5. Houd de Uit en Aan knop op de Wandschakelaar ingedrukt tot de Status LED aangaat.
  6. Druk vervolgens direct op de AAN knop.
  7. ​The Status LED will blink 5 times quickly to indicate a successful pairing.
  8. Wait until the Webapp refreshes and press Ready.

    • Related Articles

    • Connect to icasa products

      First pair the icasa lamp, the dimmer or switch and the Wall Controller to a Zigbee gateway. Connect the Pulse Wall Controller with an icasa lamp, dimmer or switch Turn off the power to the bulb. Keep the Wall Controller within 10 cm of the lamp. ...

    • Connect to Philips Hue

      First pair the Wall Controller with the Philips Hue Bridge as described in step 1. Then, one by one, pair the lights that you want to operate with the Wall Controller. 1) Pair with the Philips Hue Bridge In the Philips Hue App ...

    • Connect to IKEA Home smart

      First pair the Wall Controller with the IKEA Home smart Gateway as described in step 1. Then, one by one, pair the lights that you want to operate with the Wall Controller. 1) Pair with the IKEA Home smart Gateway Press and hold the pairing button on ...