Connect to icasa products

Connect to icasa products

First pair the icasa lamp, the dimmer or switch and the Wall Controller to a Zigbee gateway.

Connect the Pulse Wall Controller with an icasa lamp, dimmer or switch

  1. Turn off the power to the bulb.
  2. Keep the Wall Controller within 10 cm of the lamp.
  3. Turn the lamp power back on.
  4. Press and hold the Off and On button until the Status LED turns on, then immediately press the Off button 2 times.
  5. The Status LED will flash quickly during the pairing process.
  6. The Lamp will flash briefly to indicate successful pairing.
Repeat these steps for all bulbs in the group.