Connect to Philips Hue

Connect to Philips Hue

First pair the Wall Controller with the Philips Hue Bridge as described in step 1. Then, one by one, pair the lights that you want to operate with the Wall Controller.

1) Pair with the Philips Hue Bridge

  • In the Philips Hue App press Instellingen.Settings
  • Press Accessory setup.
  • Press Add accessory.
  • Press Hue Smart button.
  • Press LED is blinking.
  • Press and hold the Off and On button on the Wall Controller until the Status LED turns on.
  • Then immediately press the On button.
  • The Status LED will blink 5 times quickly to indicate a successful pairing.

The Wall Controller will  not appear in the Philips Hue App, you can leave the page in the App and proceed to step 2.

2) Pair with a Philips Hue bulb

  1. Turn off the power to the bulb.
  2. Keep the Wall Controller within 10 cm of the lamp.
  3. Turn the lamp power back on.
  4. Press and hold the Off and On button until the Status LED turns on, then immediately press the S1 button.
  5. The Status LED will flash quickly during the pairing process.
  6. The Lamp will flash briefly to indicate successful pairing.
Repeat these steps for all bulbs in the group.


    • Related Articles

    • Connect to deCONZ Phoscon

      Connect the Pulse Wall controller to deCONZ Phoscon In the Phoscon Webapp press Menu. Press Switches. Press Add new Switch. Press Other. Houd de Uit en Aan knop op de Wandschakelaar ingedrukt tot de Status LED aangaat. Druk vervolgens direct op ...
    • Connect to icasa products

      First pair the icasa lamp, the dimmer or switch and the Wall Controller to a Zigbee gateway. Connect the Pulse Wall Controller with an icasa lamp, dimmer or switch Turn off the power to the bulb. Keep the Wall Controller within 10 cm of the lamp. ...
    • Connect to IKEA Home smart

      First pair the Wall Controller with the IKEA Home smart Gateway as described in step 1. Then, one by one, pair the lights that you want to operate with the Wall Controller. 1) Pair with the IKEA Home smart Gateway Press and hold the pairing button on ...