Connect to Philips Hue

1. Disconnect the mains power to the dimmer
   
2. In the Philips Hue App press Settings  
   
3. Press Light setup
   
4. Press Add Light
   
5. Connect the mains power to the dimmer
   
6. Press Search
   
7. The connected light will flash briefly to indicate successful pairing.

If the Dimmer does not connect to the Hue Bridge, briefly press the reset button 5 times to reset the Dimmer and follow the procedure again

• Related Articles

• Connect to IKEA Homesmart

  Switch off the power to the icasa Dimmer. In the IKEA Home smart App, press Gear icon at the top right. Press Manage devices. Press +. Press LED LIGHT. Switch on the power to the icasa Dimmer. Press ->. Follow the instructions for the correct IKEA ...

• Instruction manual and connection diagrams

  Instruction manual 2 wire connection above 7.5W load. 2 wire connection below 7.5W load. 3 wire connection.

• Set or delete minimum dimming value

  Set minimum dimming value Set the desired minimum dimming value with the App or push button. (Between 0 and 50%). Press and hold the Min.Set button for 3 seconds until the connected lamp flashes. Delete minimum dimming value Set the dimming value to ...

• Reset

  Briefly press the Reset button five times. The connected lamp will flash 3 times to indicate a successful reset.