Connect to Philips Hue

Connect to Philips Hue

First pair the Remote with the Philips Hue Bridge as described in step 1. Then, one by one, pair the lights that you want to operate with the Remote.

1) Pair with the Philips Hue Bridge

  • In the Philips Hue App press Instellingen.Settings
  • Press Accessory setup.
  • Press Add accessory.
  • Press Hue Smart button.
  • Press LED is blinking.
  • Press and hold the All Off and All On button on the Remote until the Status LED turns on.
  • Then immediately press the All Off button.
  • The Status LED will blink 5 times quickly to indicate a successful pairing.
The Remote will not appear in the Philips Hue App, you can leave the page in the App and proceed to step 2.

2) Pair with a Philips Hue bulb

  1. Turn off the power to the bulb.
  2. Keep the Remote within 10 cm of the lamp.
  3. Turn the lamp power back on.
  4. Briefly press the On of the Group 1/2/3/4 to which you want to add the lamp.
  5. Press and hold the All On and All Off button until the Status LED turns on, then immediately press the Group 1 Off button. NOTE, Always use the Group 1 Off button!
  6. The Status LED will flash quickly during the pairing process.
  7. The Lamp will flash briefly to indicate successful pairing.
Repeat these steps for all bulbs in the group.