Pulse 2
Connect to icasa products
First pair the icasa lamp, the dimmer or switch and the Wall Controller to a Zigbee gateway. Connect the Pulse Wall Controller with an icasa lamp, dimmer or switch Turn off the power to the bulb. Keep the Wall Controller within 10 cm of the lamp. ...
Connect to IKEA Home smart
First pair the Wall Controller with the IKEA Home smart Gateway as described in step 1. Then, one by one, pair the lights that you want to operate with the Wall Controller. 1) Pair with the IKEA Home smart Gateway Press and hold the pairing button on ...
Reset
Factory reset Press and hold the On and Off button until the Status LED turns on, then immediately press the Off button 5 times. The Status LED blinks 3 times quickly to indicate a successful reset.