Pulse 4S / 8S
Connect to deCONZ Phoscon
Connect the Pulse Wall controller to deCONZ Phoscon In the Phoscon Webapp press Menu. Press Switches. Press Add new Switch. Press Other. Houd de Uit en Aan knop op de Wandschakelaar ingedrukt tot de Status LED aangaat. Druk vervolgens direct op ...
Store and activate light scenes
Save a light scene Set the lamps to the desired value with the app. Press and hold the desired scenario button on the Wall Controller until the status LED flashes. Activate light scene Short press the scene button to activate the scene.
Reset
Factory reset Press and hold the On and Off button until the Status LED turns on, then immediately press the Off button 5 times. The Status LED blinks 3 times quickly to indicate a successful reset.
Connect to icasa products
First pair the icasa lamp, the dimmer or switch and the Wall Controller to a Zigbee gateway. Connect the Pulse Wall Controller with an icasa lamp, dimmer or switch Turn off the power to the bulb. Keep the Wall Controller within 10 cm of the lamp. ...
Connect to IKEA Home smart
First pair the Wall Controller with the IKEA Home smart Gateway as described in step 1. Then, one by one, pair the lights that you want to operate with the Wall Controller. 1) Pair with the IKEA Home smart Gateway Press and hold the pairing button on ...
Connect to Philips Hue
First pair the Wall Controller with the Philips Hue Bridge as described in step 1. Then, one by one, pair the lights that you want to operate with the Wall Controller. 1) Pair with the Philips Hue Bridge In the Philips Hue App ...